251

BORNIT® Round Cord

road construction | PE round cord | hot and cold sealing compounds
BORNIT
Short information
  • heat-resistant (up to +200 °C), rot-proof PE round cord
  • for backfilling joints upon insertion of BORNIT® Hot or Cold Sealing Compounds
  • high adaptability and elasticity in the joint (up to 25 %)
  • 3-flank adhesion can be avoided
  • does not form bubbles in the sealant
Product
Colour
Content
Round Cord 10 mm
white
50 m / box
sufficient for:
Order-No.
EAN code
50 m
6700000039
4 017228 00843 1
Round Cord 10 mm
white
1700 m / box
sufficient for:
Order-No.
EAN code
1700 m
6700000033
4 017228 00837 0
Round Cord 13 mm
white
50 m / box
sufficient for:
Order-No.
EAN code
50 m
6700000041
4 017228 00249 1
Round Cord 13 mm
white
1100 m / box
sufficient for:
Order-No.
EAN code
1100 m
6700000034
4 017228 00838 7
Round Cord 15 mm
white
50 m / box
sufficient for:
Order-No.
EAN code
50 m
6700000043
4 017228 00250 7
Round Cord 15 mm
white
780 m / box
sufficient for:
Order-No.
EAN code
780 m
6700000035
4 017228 00839 4
Round Cord 19 mm
white
40 m / box
sufficient for:
Order-No.
EAN code
40 m
6700000103
4 017228 00873 8
Round Cord 19 mm
white
500 m / box
sufficient for:
Order-No.
EAN code
500 m
6700000105
4 017228 00874 5
Round Cord 25 mm
white
25 m / box
sufficient for:
Order-No.
EAN code
25 m
6700000045
4 017228 00871 4
Round Cord 25 mm
white
280 m / box
sufficient for:
Order-No.
EAN code
280 m
6700000037
4 017228 00841 7
Round Cord 32 mm
white
20 m / box
sufficient for:
Order-No.
EAN code
20 m
6700000102
4 017228 00876 9
Round Cord 32 mm
white
190 m / box
sufficient for:
Order-No.
EAN code
190 m
6700000104
4 017228 00875 2
Consumption
approx. 1 m per linear meter
Storage note
  • store dry
  • protect from direct solar irradiation
  • storable for 12 months

Status technical data sheet
03 December 2020

Areas of application
BORNIT® Round Cord are suitable for backfilling joints in concrete and asphalt construction indoors and outdoors. Using them, the joint depths can be exactly determined, and 3-flank adhesion of the sealing compound can be securely avoided.
BORNIT® Round Cord are suitable for all hot or cold sealing compounds, resp., can be compressed by up to 25 %, and are short-term heat-resistant up to +200 °C.

Type and properties
BORNIT® Round Cord are short-term heat-resistant, closed-cell and rot-resistant PE round cords. They are used for backfilling joints upon applying hot or cold sealing compounds, resp. BORNIT® Round Cord do not absorb water and are characterised by high adaptability and elasticity in the joint.

Advantages
  • can be used for hot and cold sealing compounds
  • rot-proof
  • compressible up to 25 %
  • no water absorption

Surface
In order to avoid the formation of bubbles in the sealing compound and flank-adhesion problems, it must be observed that the joints and joint flanks are absolutely dry and frost-free.

Processing
Compress BORNIT® Round Cord and insert them into the joint. Insert them to such an extent until the desired joint dimension has been achieved. In that, do not stretch the material. Align connection points in an abutting manner. Upon applying BORNIT® Round Cord, please observe that the outer skin of the round cord is not damaged (do not use sharp-edged equipment!). By inserting the round cord in a slightly compressed state (up to 25 %), it is securely fixed in the joint, thereby setting the desired depth for the joint compound.

Consumption
approx. 1 m per linear meter

Product data in brief
Product type
extruded round cord
Base
closed-cell polyethylene foam
Density at +20 °C
ca. 0,025 g/cm³
Consistency
highly elastic
Heat resistance
+200 °C
Colour(s)
white
Dimensions
diameter 10 / 13 / 15 / 19 / 25 / 32 mm, others on request
Application
manual
Storage
store dry protect from direct solar irradiation
Shelf life
storable for 12 months
Substances hazardous to health in terms of the ordinance on hazardous materials
keine
Hazard class according to ADR
keine
Flash point
+360 °C

Melting point
>+110 °C

Health and fire protection, occupational safety
For information on handling, safety and ecology, please refer to the current safety datasheet.

Storage
BORNIT® Round Cord can be stored for 12 months. Protect the boxes from moisture and direct solar irradiation or heat, resp.!

Disposal note
Product residues can be disposed of as mixed plastics together with commercial waste.

Note
The above information replaces all previous technical information about the product. Thus, this information is no longer valid. The details have been compiled according to the latest state of application technology. Please observe, however, that, depending on the state of the construction object, deviations from the method of application suggested in the datasheet may be required. Unless agreed otherwise in individual contracts, any information contained in the datasheet shall be non-binding and thus does not represent an agreed product constitution. We reserve the right to any changes in the information contained in this datasheet anytime.

BORNIT<sup class=® Round Cord, joint, backfilling, PE, hot sealing compounds, cold sealing compounds">