BORNIT® Bitumen Joint Sealant 2C mixing nozzle
mixing spout | mixing nozzle | static mixer | 2-component | cartridge
Short information
- for direct mixing during grouting
- transparent static mixer
- suitable for Bitumen Joint Sealant 2C cartridge
- mixing range 115 mm
- nozzle tip diameter 1 to 8 mm
Consumption
1 piece mixing nozzle per process
Storage note
storable for 12 months
Complementary products
Follow-up products
status technical data sheet
1st November 2021
Type and properties
BORNIT® Bitumen Joint Sealant 2C mixing nozzle is a plastic mixing nozzle for mixing of the 2-component, bituminous crack repair compound BORNIT® Bitumen Joint Sealant 2C.
mixing nozzle: D x L = 22 mm x 250 mm, nozzle tip can be shortened from 1 to 8 mm diameter, length of mixing area approx. 115 mm.
mixing nozzle: D x L = 22 mm x 250 mm, nozzle tip can be shortened from 1 to 8 mm diameter, length of mixing area approx. 115 mm.
Advantages
- thorough mixing
- mixing takes place directly during grouting
Consumption
1 piece mixing nozzle per process
Product data in brief
Product type
mixing nozzle for 2-component products with conical tip
Base
plastic
colour(s)
transparent
Application
special cartridge gun
Shelf life
storable for 12 months
Substances hazardous to health in terms of the ordinance on hazardous materials
keine
Hazard class according to ADR
keine
Flash point
n.a.
Diameter nozzle tip
from 1 to 8 mm (cut cone)
Length mixing area
115 mm
Diameter thread cartridge
22 mm
Length
221 mm
Connector
threaded connection
Health and fire protection, occupational safety
To ensure safe handling of the product, the physical, safety, toxicological and ecological information provided online, the information in the current safety data sheet and the additional information on the label must be read and followed before purchasing or using the product! The applicable regulations, ordinances and laws must be complied with.
In case of doubt, please contact the BORNIT® application technology department or the BORNIT® service hotline on +49 375 2795 123.
In case of doubt, please contact the BORNIT® application technology department or the BORNIT® service hotline on +49 375 2795 123.
Storage
The mixing nozzles must be protected from direct solar irradiation, storable for 12 months.
Note
The above information replaces all previous technical information about the product. Thus, this information is no longer valid. The details have been compiled according to the latest state of application technology. Please observe, however, that, depending on the state of the construction object, deviations from the method of application suggested in the datasheet may be required. Unless agreed otherwise in individual contracts, any information contained in the datasheet shall be non-binding and thus does not represent an agreed product constitution. We reserve the right to any changes in the information contained in this datasheet anytime.
® Bitumen Joint Sealant 2C mixing nozzle, application image">