217

BORNIT® Bitumen Coating

bitumen | coating | bitumen solution | against ground dampness
BORNIT
Short information
  • solvent-based bituminous coating
  • for protection of concrete surfaces, plaster and masonry
  • against ground dampness
  • can be brushed or sprayed-on
  • good opacity with one coating already
  • easiest handling, since manufactured ready for use
  • universally applicable, therefore numerous uses
  • good adhesive properties
Product
Colour
Content
Bitumen Coating
black
5 ltr. / bucket
sufficient for:
Order-No.
EAN code
euro pallet
approx. 12,5 m²
6900002625
4 017228 00397 9
75 bucket
Bitumen Coating
black
10 ltr. / bucket
sufficient for:
Order-No.
EAN code
euro pallet
approx. 25 m²
6900002624
4 017228 00398 6
45 bucket
Bitumen Coating
black
25 ltr. / bucket
sufficient for:
Order-No.
EAN code
euro pallet
approx. 62,5 m²
6900002623
4 017228 00399 3
18 bucket
Bitumen Coating
black
200 ltr. / barrel
sufficient for:
Order-No.
EAN code
barrel pallet
approx. 500 m²
6900002622
4 017228 00400 6
2 barrel
Consumption
approx 0.4 litres/m² per coat (2 coats recommended)
Storage note
  • +5 °C, product is not sensitive to frost
  • in originally sealed containers storable for 12 months

Status technical data sheet
12 November 2020

Areas of application
BORNIT® Bitumen Coating is a bitumen solution with high penetrating capability and good opacity. BORNIT® Bitumen Coating protects building components with concrete, brick or plaster surfaces against ground moisture.
For bonding enhancement on concrete, masonry or plaster, BORNIT® Bitumen Primer should be used as a primer. BORNIT® Bitumen Coating also adheres well to wood and metal. It is not suitable for application on expanded or extruded polystyrene.

Type and properties
BORNIT® Bitumen Coating is a solvent-containing, spreadable and sprayable, unfilled bitumen-based coating material and is processed cold. Tested according to AIB.

Advantages
  • good opacity with one coating already
  • easiest handling, since manufactured ready for use
  • universally applicable, therefore numerous uses
  • good adhesive properties
  • economical and cost-cutting, due to low equipment and material costs and effort

Surface
The substrate must be dry, clean and grease-free. Loose particles, defective concrete and plaster as well as cracks and holes must be repaired in advance. BORNIT® Bitumen Coating adheres to all substrates common in construction. Use BORNIT® Bitumen Primer as primer.

Processing
BORNIT® Bitumen Coating can be processed at normal temperatures without warming up. Stir up BORNIT® Bitumen Coating prior to processing! The processing temperature (ambient and substrate temperature) should not be below +5 °C and not above +35 °C. In the cold season, store the product at room temperature prior to processing. BORNIT® Bitumen Coating is applied to the substrate with a small or large brush or spray device. Recommended coating sequence: one priming coat with BORNIT® Bitumen Primer and two topcoats with BORNIT® Bitumen Coating.
Do not use in closed rooms!

Consumption
approx 0.4 litres/m² per coat (2 coats recommended)

Product data in brief
Product type
unfilled bitumen coating
Base
bitumen, solvent
Solvent
white spirit
Density at +20 °C
0.91 - 0.93 g/cm³
Consistency
liquid
Film-forming components
approx. 60 %
Colour(s)
black
Application
with roller, spraying equipment (airless), wide brush, etc.
Processing temperature (ambient and substrate)
min. +5 °C, but not sensitive to frost!
Thorough hardening time
6-8 hours at +20 °C
Cleaning
BORNIT® MultiClean Spray, BORNIT® MultiClean, BORNIT® Bitumen Cleaner
Storage
+5 °C, product is not sensitive to frost
Shelf life
in originally sealed containers storable for 12 months
GISCODE
BBP30
VOC category
permissible according to VOC category g/Lb/: < 350 g/l
Actual permissible VOC content
< 350 g/l
Hazard class according to ADR
entzündbare Flüssigkeiten (Flam. Liq. 3)
Acc. to Industrial Safety Regulation (BetrSichV)
bituminous cold adhesive
Flash point
30 – 43 °C

Fillers
none

Health and fire protection, occupational safety
For information on handling, safety and ecology, please refer to the current safety datasheet.

Storage
In originally sealed containers storable for 12 months. The product is not sensitive to frost!

Disposal note
Only recycle completely empty containers. Material residues can be disposed of according to AVV-ASN: 080409* (adhesive and sealing compound residues containing organic solvents or other hazardous substances).

Note
The above information replaces all previous technical information about the product. Thus, this information is no longer valid. The details have been compiled according to the latest state of application technology. Please observe, however, that, depending on the state of the construction object, deviations from the method of application suggested in the datasheet may be required. Unless agreed otherwise in individual contracts, any information contained in the datasheet shall be non-binding and thus does not represent an agreed product constitution. We reserve the right to any changes in the information contained in this datasheet anytime.

UFI PC00-60HP-300C-GSK9

Safety Data Sheet Poison Information Centre , 24h: +49-361-730730

ERFURT - Poison Control Centre Erfurt, Joint Poison Information Centre of the federal States of Mecklenburg-Western Pomerania, Saxony, Saxony-Anhalt and Thuringia; ggiz@ggiz-erfurt.de; www.ggiz-erfurt.de

-     What: name of the substance or product as precisely as possible, etc.
-     How much: as exact a quantity as possible
-     Who: Age, weight, sex and condition of the person(s) concerned.
-     When: Time of the event
-     Where: Place of occurrence
-     How: ingestion, inhalation, skin contact, etc.
-     Why: accidentally or intentionally

recommended, personal protective equipment: