218

BORNIT® Bitumen Adhesive

bitumen adhesive | roof coverings | roofing materials | roof slopes
BORNIT
Short information
  • bituminous cold adhesive
  • for adhering roof membranes in the form of sheets and other roof coverings
  • roof pitches up to 12.5 %
  • can be brushed on
  • no seams
  • cold workable
Product
Colour
Content
Bitumen Adhesive
black
5 ltr. / bucket
sufficient for:
Order-No.
EAN code
euro pallet
approx. 6.25 m²
6900002613
4 017228 00368 9
75 bucket
Bitumen Adhesive
black
10 ltr. / bucket
sufficient for:
Order-No.
EAN code
euro pallet
approx. 12.5 m²
6900002535
4 017228 00369 6
45 bucket
Bitumen Adhesive
black
25 ltr. / bucket
sufficient for:
Order-No.
EAN code
euro pallet
approx. 18.75 m²
6900002612
4 017228 00370 2
18 bucket
Consumption
approx. 0.8 l / m²
Storage note
  • min. +5 °C, product is not sensitive to frost
  • in originally sealed containers storable for 12 months

Complementary products
PrimingCleaningFollow-up products
  • sheet roofing and other roofing materials
Status technical data sheet
09 November 2020

Areas of application
BORNIT® Bitumen Adhesive is designed for adhering roof membranes in the form of sheets and other roof coverings to roof pitches up to 12.5 %. BORNIT® Bitumen Adhesive adheres to concrete, masonry, plaster, bitumen roofing felt and other common roof membranes. Prior to application on concrete, masonry and plaster, prime the substrate with BORNIT® Bitumen Primer for pore wetting. In case of old, weathered roof membranes, priming with BORNIT® Bitumen Primer is essential! BORNIT® Bitumen Adhesive is not suitable for adhering polystyrene products and for bituminous sheeting!
BORNIT® Bitumen Adhesive must not be directly applied to wooden roof boarding as well as lathing or permeable substrates! In this case, suitable bituminous roof sheeting (e.g. V 13) must be nailed down in order to prevent leakage or penetration, resp., of the material at high temperatures.

Type and properties
BORNIT® Bitumen Adhesive is a cold workable , spreadable, medium-viscosity, bitumen-solvent-based adhesive without fillers. BORNIT® Bitumen Adhesive has been tested according to works standard.

Advantages
  • economical and cost-reducing as there is less equipment, material and labor
  • ready for use
  • can be processed cold

Surface
The substrate must be dry and free from dust or other contaminations. For mineral substrates and in case of heavily weathered roof membranes, use BORNIT® Bitumen Primer for priming.

Processing
BORNIT® Bitumen Adhesive can be used without heating and dilution. BORNIT® Bitumen Adhesive must be stirred up prior to processing! During processing, the product should have a temperature of min. +20 °C. The processing temperature (ambient and substrate temperature) should not be below +5 °C and not above +35 °C.

Consumption
approx. 0.8 l / m²

Product data in brief
Product type
bituminous cold adhesive
Base
bitumen, solvent
Density at +20 °C
0.93-0.95 g/cm³
Consistency
medium viscosity
Film-forming components
approx. 70 %
Heat resistance
at +70 °C no disadvantageous change
Colour(s)
black
Application
large or small brush, roller
Processing temperature (ambient and substrate)
at least +5 °C to +35 °C
Cleaning
BORNIT® MultiClean Spray, BORNIT® MultiClean or BORNIT® Bitumen Cleaner
Storage
min. +5 °C, product is not sensitive to frost
Shelf life
in originally sealed containers storable for 12 months
GISCODE
BBP30
VOC category
2004/42/EG 1i/Lb: 500 g/ltr.
Actual permissible VOC content
< 260 g/ltr.
Hazard class according to ADR
entzündbare Flüssigkeiten (Flam. Liq. 3)
Acc. to Industrial Safety Regulation (BetrSichV)
flammable
Flash point
30 – 43 °C

Possible roof inclination
up to 12.5 %

Health and fire protection, occupational safety
For information on handling, safety and ecology, please refer to the current safety datasheet.

Storage
In originally sealed containers storable for 12 months. The product is not sensitive to frost!

Disposal note
Only recycle completely empty containers. Material residues can be disposed of according to AVV-ASN: 080409* (adhesive and sealing compound residues containing organic solvents or other hazardous substances).

Note
The above information replaces all previous technical information about the product. Thus, this information is no longer valid. The details have been compiled according to the latest state of application technology. Please observe, however, that, depending on the state of the construction object, deviations from the method of application suggested in the datasheet may be required. Unless agreed otherwise in individual contracts, any information contained in the datasheet shall be non-binding and thus does not represent an agreed product constitution. We reserve the right to any changes in the information contained in this datasheet anytime.
BORNIT<sup class=® Bitumen Adhesive, bitumen, adhesive, roof sheeting">

UFI DM00-Q0KV-000U-FTAG

Safety Data Sheet Poison Information Centre , 24h: +49-361-730730

ERFURT - Poison Control Centre Erfurt, Joint Poison Information Centre of the federal States of Mecklenburg-Western Pomerania, Saxony, Saxony-Anhalt and Thuringia; ggiz@ggiz-erfurt.de; www.ggiz-erfurt.de

-     What: name of the substance or product as precisely as possible, etc.
-     How much: as exact a quantity as possible
-     Who: Age, weight, sex and condition of the person(s) concerned.
-     When: Time of the event
-     Where: Place of occurrence
-     How: ingestion, inhalation, skin contact, etc.
-     Why: accidentally or intentionally

recommended, personal protective equipment: