BORNIT® High-quality chippings

high-quality chippings | chipping | grip | grit | spreading
short information
  • high-quality chippings for chipping
  • increases the grip
  • stabilising grain to protect the subsoil
1-3 high-quality chippings
25,0 kg / bucket
sufficient for:
EAN code
euro pallet
approx. 1.7 m² at 1 cm spreading thickness
4 017228 00677 2
18 bucket
approx. 15 kg/m² per cm layer thickness
storage note
  • store in a dry place, protected from solar irradiation
  • storable for 24 months in containers

complementary products
status technical data sheet
01 November 2021

areas of application
BORNIT® High-quality chippings are optimally suited for chipping repair work on asphalt and concrete and for chipping of weathered surfaces.

type and properties
High-quality chippings are a double-crushed stone, in an angular shape, usually come directly from quarries and are therefore dust-adherent. Since it is a natural product, deviations in colour, shape and size may occur.

Over- and undersize parts do not entitle to a complaint.

Please note that the stones are measured at the narrowest point. The size specifications used therefore refer to the technical measurement. The actual size may therefore differ slightly.

  • very robust and durable
  • angular shape, good clawing
  • good stackability in the container

Possible substrates are concrete or asphalt surfaces after application of BORNIT® Asphalt Pore Sealer.

Spread generously onto the fresh BORNIT® Asphalt Pore Sealer. The bitumen material should be completely covered.

approx. 15 kg/m² per cm layer thickness

product data in brief
product type
crushed chippings ( high-quality chippings)
natural stone
density at +20 °C
approx. 1500 kg/m³
sharp edged, free-flowing
anthracite-grey (other colours are possible)
shovel, broom
store in a dry place, protected from solar irradiation
shelf life
storable for 24 months in containers
flash point
Grain sizes

health and fire protection, occupational safety
To ensure safe handling of the product, the physical, safety, toxicological and ecological information provided online, the information in the current safety data sheet and the additional information on the label must be read and followed before purchasing or using the product! The applicable regulations, ordinances and laws must be complied with.

In case of doubt, please contact the BORNIT® application technology department or the BORNIT® service hotline on +49 375 2795 123.

Can be stored for 24 months in the container.

The above information replaces all previous technical information about the product. Thus, this information is no longer valid. The details have been compiled according to the latest state of application technology. Please observe, however, that, depending on the state of the construction object, deviations from the method of application suggested in the datasheet may be required. Unless agreed otherwise in individual contracts, any information contained in the datasheet shall be non-binding and thus does not represent an agreed product constitution. We reserve the right to any changes in the information contained in this datasheet anytime.