BORNIT® Anchor Stirrer
anchor stirrer | mixing paddle | stir in without bubbles
Short information
- specially shaped mixing paddle for bituminous leveling compounds
- for bubble-free mixing of 1- and 2-component BORNIT® bitumen thick coatings and slurries
- strong suction effect prevents lump formation or material pockets
- 16 mm hexagonal socket, fits all common mixers
- quick and easy to clean due to low material adhesion
- also with Hexafix mount
Consumption
Storage note
store dry
Complementary products
CleaningFollow-up products
Whisk clean in water immediately after use
status technical data sheet
4th October 2021
Areas of application
Serves to evenly stir mineral components in the liquid component of the bitumen thick coatings as well as mineral slurries. Is an ideal stirrer for all medium and high viscosity products. The shape of the stirrer enables a clean removal of material from the bottom of the container and the container wall.
Type and properties
specially shaped mixing paddles for bubble-free stirring in of aggregate components as well as the classic stirring up of products.
Advantages
- 16 mm hexagonal socket, fits all common mixers
- easy to clean
- No stirring in of air
Processing
Den Ankerrührer in die Aufnahme des Rührwerks stecken und fest spannen. Mit niedrigen Drehzahlen beginnen, um die Mischwirkung an des Produkt anzupassen.
Product data in brief
Product type
Anchor stirrer
Base
metal
colour(s)
green
Cleaning
BORNIT® MultiClean Spray, BORNIT® MultiClean and BORNIT® Bitumen Cleaner
storage
store dry
Hazard class according to ADR
keine
Flash point
n.a.
Drill holder
Hexafix 16 mm
cross-section
6-point
Length
590 mm
stirring basket
170 mm
recommended mixing amount
25 - 40 kg
Health and fire protection, occupational safety
To ensure safe handling of the product, the physical, safety, toxicological and ecological information provided online, the information in the current operating instructions and the additional information on the label must be read and followed before purchasing or using the product! The applicable regulations, ordinances and laws must be complied with.
In case of doubt, please contact the BORNIT® application technology department or the BORNIT® service hotline on +49 375 2795 123.
In case of doubt, please contact the BORNIT® application technology department or the BORNIT® service hotline on +49 375 2795 123.
Storage
Store the stirrer in a dry place.
Note
The information set out above supersedes all previous technical information relating to the product. The previous information is therefore no longer valid. The details have been compiled in accordance with the latest state of the art in application technology. Please note, however, that depending on the condition of the building, it may be necessary to deviate from the working method recommended in this data sheet. Unless otherwise agreed in an individual contract, all information contained in this data sheet is non-binding and therefore does not constitute an agreed product specification. We reserve the right to make changes to the information contained in this data sheet at any time.
The product illustrations are to be understood as examples. No legally binding claim can be derived from them. We reserve the right to make changes to the product’s appearance.
Our packaging complies with the relevant legal requirements and with Regulation (EU) 2025/40 on packaging and packaging waste (PPWR). The technical documentation in accordance with Annex VII is available and can be provided on request by email to info@bornit.de.
The product illustrations are to be understood as examples. No legally binding claim can be derived from them. We reserve the right to make changes to the product’s appearance.
Our packaging complies with the relevant legal requirements and with Regulation (EU) 2025/40 on packaging and packaging waste (PPWR). The technical documentation in accordance with Annex VII is available and can be provided on request by email to info@bornit.de.
Recommended, personal protective equipment:
