BORNIT^® Stick Emulsion

status technical data sheet

25th June 2026

Areas of application

In connection with cement and sand, BORNIT^® Stick Emulsion serves producing bonding bridges between mineral construction materials, such as masonry, plaster, concrete and screed. Furthermore, using BORNIT^® Stick Emulsion, mineral construction materials can be made more flexible, their water absorption can be reduced, their resistance to frost and de-icing salt and their resilience to aggressive substances can be improved, as well as the formation of shrinkage cracks reduced. Adding BORNIT^® Stick Emulsion to BORNIT^® Slurry SF achieves product flexibilisation, smoother processing and better adhesion to the substrate.
BORNIT^® Stick Emulsion serves as a primer (diluted with water up to 1:1) for pre-treatment of the substrate for waterproofing with BORNIT^® Profi Hybrid 2C.

Type and properties

BORNIT^® Stick Emulsion is a versatile, aqueous, plasticiser- and solvent-free dispersion based on butadiene-styrene latex for modifying cement-containing mortar compounds, plasters and slurries.
Furthermore, BORNIT^® Stick Emulsion can be used as a primer for waterproofing with BORNIT^® Profi Hybrid 2C. Due to its non-ionic stabilisation, the product is compatible with all common standard cements.

Advantages

Surface

The substrate must be clean, stable and free from separating substances. Remove dust, contaminations, loose particles and standing water prior to processing.

Processing

As a primer for BORNIT^® Profi Hybrid 2C:
Apply BORNIT^® Stick Emulsion diluted with water up to 1:1 using a large or small brush or a roller. After drying of the stick emulsion – drying time at +20 °C approx. 3 hours - BORNIT^® Profi Hybrid 2C can be applied.

As an additive to BORNIT^® Slurry SF, mortars, plasters and concrete:
Add 10 to 20 % of BORNIT^® Stick Emulsion to the mixing water. Mortar and concrete must be prepared with a plastic consistency according to applicable DIN regulations.

For cement-based bonding bridges:
Mix BORNIT^® Stick Emulsion with water 1:2, stir into a slurry with a cement/sand mixture (1:2) and apply with a firm or broad brush. Apply plaster and screed whilst the slurry is still wet. As a cement-based bonding bridge for waterproofing materials, a drying period of at least 24 hours is required.

Consumption

as a primer and as a cement-based bonding bridge approx. 0.20 kg/m²,
as an additive: approx. 25-50 g per kg of slurry, 15-30 g per kg of mortar

Product type

aqueous polymer dispersion

Base

butadiene-styrene latex

Density at +20 °C

1.00 g/cm³

PH-value

10.0

Consistency

liquid

colour(s)

milky white

rainfast

approx. 3 hours

Thorough hardening time

approx. 3 hours

Cleaning

immediately after use with water

storage

frost-free and cool, do not exceed storage temperature of +35 °C!

Shelf life

in originally sealed container storable for 24 months

GISCODE

GE0

GISCODE link comp. A

https://www.wingisonline.de/showinfodoc.aspx?gisbaunr=4/00000056864/000009&docid=3412&lang=de

Substances hazardous to health in terms of the ordinance on hazardous materials

none

Hazard class according to ADR

none

Boiling start and Boiling range

+100 °C

Viscosity

150 mPas

Elongation at break

700 %

Dry substance content

44 +/- 1%

Health and fire protection, occupational safety

To ensure safe handling of the product, the physical, safety, toxicological and ecological information provided online, the information in the current safety data sheet and the additional information on the label must be read and followed before purchasing or using the product! The applicable regulations, ordinances and laws must be complied with.

In case of doubt, please contact the BORNIT^® application technology department or the BORNIT^® service hotline on +49 375 2795 123.

Storage

In closed containers, cool, but frost-free, the product can be stored for approx. 2 years. Firmly re-seal opened containers. The latex has a slight tendency to creaming, therefore, after longer storage, it should be stirred up prior to use. The upper storage temperature should not exceed +35 °C.

Disposal note

Only recycle completely empty containers. Material residues can be disposed of according to AVV-ASN: 070208 (other reaction and distillation residues).

Note

The information set out above supersedes all previous technical information relating to the product. The previous information is therefore no longer valid. The details have been compiled in accordance with the latest state of the art in application technology. Please note, however, that depending on the condition of the building, it may be necessary to deviate from the working method recommended in this data sheet. Unless otherwise agreed in an individual contract, all information contained in this data sheet is non-binding and therefore does not constitute an agreed product specification. We reserve the right to make changes to the information contained in this data sheet at any time.

The product illustrations are to be understood as examples. No legally binding claim can be derived from them. We reserve the right to make changes to the product’s appearance.

Our packaging complies with the relevant legal requirements and with Regulation (EU) 2025/40 on packaging and packaging waste (PPWR). The technical documentation in accordance with Annex VII is available and can be provided on request by email to info@bornit.de.

GISCODE

GE0

UN-number

No dangerous good in sense of these transport regulations.

Hazard-determining components for labelling

1,2-Benzisothiazol-3(2H)-on

EUH-records

EUH208: Contains 1,2-Benzisothiazol-3(2H)-on. May produce an allergic reaction.