BORNIT® Profi Cartridge Gun
tool | Bitumen Joint Sealant 2C | cartridge | bitumen | press
Short information
- robust special cartridge gun, no DIY quality
- for processing of the two-component bitumen repair compound BORNIT® Bitumen Joint Sealant 2C
- uniform material flow, no material overrun
- ergonomic pressing mechanism for exact dosing
- long service life thanks to hardened push rod
- suitable for cartridges with a diameter of 65 mm
Consumption
Storage note
store the catridge gun in a dry place
Complementary products
CleaningFollow-up products
status technical data sheet
8th September 2021
Areas of application
For squeezing out adhesives, sealants, lubricants and much more, ideal professional cartridge press for heavy-duty use on the construction site and in the workshop.
Type and properties
The BORNIT® Profi Cartridge Gun has a very high quality finish and was specially designed for professional use. The robust construction facilitates the processing of especially viscous materials from cartridges. The pressure relief prevents the pressure plunger from being pressed down. The cartridge gun has a triple slide with smooth push rods.
Advantages
- robust special cartridge gun, no DIY quality
- for processing of the two-component bitumen repair compound BORNIT® Bitumen Joint Sealant 2C
- uniform material flow, no material overrun
- ergonomic pressing mechanism for exact dosing
- long service life thanks to hardened push rod
- with attachment lug for carabiner or rope
- suitable for 220 x 65 mm cartridges
Product data in brief
Product type
Profi cartridge gun
Base
robuste metal press for 220 x 65 mm cartridges
colour(s)
black
Cleaning
BORNIT® MultiClean Spray, BORNIT® MultiClean or BORNIT® Bitumen Cleaner
storage
store the catridge gun in a dry place
Hazard class according to ADR
keine
Health and fire protection, occupational safety
To ensure safe handling of the product, the physical, safety, toxicological and ecological information provided online, the information in the current operating instructions and the additional information on the label must be read and followed before purchasing or using the product! The applicable regulations, ordinances and laws must be complied with.
In case of doubt, please contact the BORNIT® application technology department or the BORNIT® service hotline on +49 375 2795 123.
In case of doubt, please contact the BORNIT® application technology department or the BORNIT® service hotline on +49 375 2795 123.
Storage
Store the cartridge gun in a dry place, oil push rods if stored for a long time.
Note
The information set out above supersedes all previous technical information relating to the product. The previous information is therefore no longer valid. The details have been compiled in accordance with the latest state of the art in application technology. Please note, however, that depending on the condition of the building, it may be necessary to deviate from the working method recommended in this data sheet. Unless otherwise agreed in an individual contract, all information contained in this data sheet is non-binding and therefore does not constitute an agreed product specification. We reserve the right to make changes to the information contained in this data sheet at any time.
The product illustrations are to be understood as examples. No legally binding claim can be derived from them. We reserve the right to make changes to the product’s appearance.
Our packaging complies with the relevant legal requirements and with Regulation (EU) 2025/40 on packaging and packaging waste (PPWR). The technical documentation in accordance with Annex VII is available and can be provided on request by email to info@bornit.de.
The product illustrations are to be understood as examples. No legally binding claim can be derived from them. We reserve the right to make changes to the product’s appearance.
Our packaging complies with the relevant legal requirements and with Regulation (EU) 2025/40 on packaging and packaging waste (PPWR). The technical documentation in accordance with Annex VII is available and can be provided on request by email to info@bornit.de.
