reaction accelerator | quick drying | rain resistance | quick dry
short information
  • reaction component:
  • with BORNIT® Crack Flex - treated areas of cracking are passable after a few minutes
  • with BORNIT® Profi 1C S - accelerated drying
22 kg / canister
sufficient for:
EAN code
euro pallet
approx. 1375 linear metre
4 017228 00081 7
24 canister
approx. 0.016 kg per linear metre (corresponds to the amount of approx. 8 % BORNIT® Rissflex)
storage note
  • protect product from frost!
  • in originally sealed container storable for 12 months

status technical data sheet
26 February 2018

areas of application
BORNIT® SpeedUp can only be used in combination and based on the technical specifications of the respective BORNIT® product system. All information on application, application concentration and consumption of BORNIT® SpeedUp can be found in the respective technical data sheet. Only suitable for machine application with suitable spraying equipment (2-component mixing nozzles or similar).

type and properties
BORNIT® SpeedUp is an aqueous special solution which can be used as a reaction accelerator for the machine processing of various BORNIT® product systems. By using BORNIT® SpeedUp, rapid drying and rain resistance of BORNIT® bitumen emulsion products is achieved.

Briefly stir BORNIT® SpeedUp before application or shake it up in the canister. The use of BORNIT® SpeedUp is only possible with machine application of the respective BORNIT® product system with suitable spraying equipment (2-component mixing nozzles or similar). The addition to the respective product must take place in the spraying machine immediately before application. A prior addition of BORNIT®-SpeedUp by stirring into the respective product is not possible due to the very fast reaction process!

approx. 0.016 kg per linear metre (corresponds to the amount of approx. 8 % BORNIT® Rissflex)

product data in brief
product type
reactive accelerator
aqueous solution with special additives
density at +20 °C
1,06 - 1,08 g/cm³
8.0 - 9.0
thin liquid
transparent, slightly yellowish
2C mixing nozzle sprayer or similar sprayer
processing temperature (ambient and substrate)
+5 °C up to +35 °C
protect product from frost!
shelf life
in originally sealed container storable for 12 months
VOC category
actual permissible VOC content
0 g/ltr.
hazard class according to ADR
boiling start and Boiling range
+100 °C
health and fire protection, occupational safety
To ensure safe handling of the product, the physical, safety, toxicological and ecological information provided online, the information in the current safety data sheet and the additional information on the label must be read and followed before purchasing or using the product! The applicable regulations, ordinances and laws must be complied with.

In case of doubt, please contact the BORNIT® application technology department or the BORNIT® service hotline on +49 375 2795 123.

In originally sealed container storable for 12 months. Protect from frost!

disposal note
Only recycle completely empty, cleaned containers. Material residues can be disposed of according to AVV-ASN: 060205* (other bases).

The above information replaces all previous technical information about the product. Thus, this information is no longer valid. The details have been compiled according to the latest state of application technology. Please observe, however, that, depending on the state of the construction object, deviations from the method of application suggested in the datasheet may be required. Unless agreed otherwise in individual contracts, any information contained in the datasheet shall be non-binding and thus does not represent an agreed product constitution. We reserve the right to any changes in the information contained in this datasheet anytime.
BORNIT<sup class=® SpeedUp, reaction accelerator, fast drying">


Safety Data Sheet Poison Information Centre , 24h: +49-361-730730

ERFURT - Poison Control Centre Erfurt, Joint Poison Information Centre of the federal States of Mecklenburg-Western Pomerania, Saxony, Saxony-Anhalt and Thuringia; ggiz@ggiz-erfurt.de; www.ggiz-erfurt.de

-     What: name of the substance or product as precisely as possible, etc.
-     How much: as exact a quantity as possible
-     Who: Age, weight, sex and condition of the person(s) concerned.
-     When: Time of the event
-     Where: Place of occurrence
-     How: ingestion, inhalation, skin contact, etc.
-     Why: accidentally or intentionally

No dangerous good in sense of these transport regulations.

Hazard pictograms

signal word

Hazard-determining components for labelling
Calcium chloride

EUH208: Contains 1,2-Benzisothiazol-3(2H)-on. May produce an allergic reaction.

recommended, personal protective equipment: