BORNIT® Empty cartridge with spout
Structural waterproofing | Moisture | Injectables | silicifying
Short information
- 500 ml plastic bottle
- Can be used as a funnel if the soil is cut off
- with BORNIT®-Sperr-Injekt for the renovation and material consolidation of masonry and concrete walls
- self-dosing when processing with capillary sticks
Consumption
Bottle per borehole
Storage note
- Protect from direct sunlight!
- Can be stored for 12 months
Complementary products
Follow-up products
status technical data sheet
15th December 2021
Areas of application
Replacement bottle for the use of BORNIT®-Sperr-Injekt from large containers
Type and properties
Transparent 500ml plastic bottle with spout. By cutting off the bottom, the bottle can be used as a filling funnel.
Consumption
Bottle per borehole
Product data in brief
Product type
Plastic bottle
Base
Plastic
colour(s)
transparent
Dimensions
500 ml
storage
Protect from direct sunlight!
Shelf life
Can be stored for 12 months
Substances hazardous to health in terms of the ordinance on hazardous materials
keine
Hazard class according to ADR
keine
Health and fire protection, occupational safety
To ensure safe handling of the product, the physical, safety, toxicological and ecological information provided online, the information in the current operating instructions and the additional information on the label must be read and followed before purchasing or using the product! The applicable regulations, ordinances and laws must be complied with.
In case of doubt, please contact the BORNIT® application technology department or the BORNIT® service hotline on +49 375 2795 123.
In case of doubt, please contact the BORNIT® application technology department or the BORNIT® service hotline on +49 375 2795 123.
Storage
Can be stored for 12 months
Note
The information set out above supersedes all previous technical information relating to the product. The previous information is therefore no longer valid. The details have been compiled in accordance with the latest state of the art in application technology. Please note, however, that depending on the condition of the building, it may be necessary to deviate from the working method recommended in this data sheet. Unless otherwise agreed in an individual contract, all information contained in this data sheet is non-binding and therefore does not constitute an agreed product specification. We reserve the right to make changes to the information contained in this data sheet at any time.
The product illustrations are to be understood as examples. No legally binding claim can be derived from them. We reserve the right to make changes to the product’s appearance.
Our packaging complies with the relevant legal requirements and with Regulation (EU) 2025/40 on packaging and packaging waste (PPWR). The technical documentation in accordance with Annex VII is available and can be provided on request by email to info@bornit.de.
The product illustrations are to be understood as examples. No legally binding claim can be derived from them. We reserve the right to make changes to the product’s appearance.
Our packaging complies with the relevant legal requirements and with Regulation (EU) 2025/40 on packaging and packaging waste (PPWR). The technical documentation in accordance with Annex VII is available and can be provided on request by email to info@bornit.de.
