161

BORNIT® Bituminous Emulsion C60B4-REP

ramp spraying equipment | bitumen emulsion | cationic | asphalt | TL BE-StB 15
BORNIT
Short information
  • solvent-free
  • unstable, cationic bituminous emulsion
  • for surface treatments with standardized aggregates for sealing asphalt streets
  • quality compliant with TL BE-StB 15
  • machine application with ramp spray machines and road master spreaders
Product
Colour
Content
Bituminous Emulsion C60B4-REP
black
25 kg / canister
sufficient for:
Order-No.
EAN code
euro pallet
approx. 11.3 - 17.8 m²
6900002678
4 017228 00768 7
24 canister
Bituminous Emulsion C60B4-REP
black
190 kg / barrel
sufficient for:
Order-No.
EAN code
barrel pallet
approx. 86.4 - 135.7 m²
6900002677
4 017228 00740 3
2 barrel
Bituminous Emulsion C60B4-REP
black
1000 kg / IBC tank pallet
sufficient for:
Order-No.
EAN code
approx. 454.5 - 714.3 m²
6900003422
4 017228 00695 6
Consumption
approx. 1.4 - 2.2 kg/m², depending on the substrate and the surface treatment to be undertaken
Storage note
  • at least +5 °C - sensitive to frost
  • in originally sealed containers storable for 4 weeks

Status technical data sheet
05 November 2020

Areas of application
BORNIT® Bituminous emulsion C60B4-REP is suitable for repair work on asphalt surfaces. Uniformly apply the emulsion onto the surface to be treated (spraying) and, depending on the application, immediately spread suitable high-grade chippings thereon.

Type and properties
BORNIT® Bituminous Emulsion C60B4-REP is an unstable, cationic bitumen emulsion with quick breaking-down and setting behaviour in contact with high-quality chippings. BORNIT® Bituminous emulsion C60B4-REP is solvent-free and corresponds to TL BE-StB 15.

Processing
Immediate processing after delivery is recommended. The chippings used must be clean and dust-free. They may be moist, but not wet. Filling, storage and substrate temperatures: min. +5 °C
Processing temperature: min. 40 °C – max. 60 °C
The pipe systems of the transport and processing vehicles have to be discharged, if applicable, following completion of work. Longer transport of the emulsion must be undertaken with full tanks. In order to avoid foaming of the product, bottom-up filling is to be used for filling or refilling. If spraying equipment is used for processing, then it must be cleaned immediately after completion of work in order to avoid clogging of nozzles and pipes with bitumen. For cleaning, please observe the respective regulations of the spraying equipment manufacturer. BORNIT® Bituminous Emulsion C60B4-REP must not be mixed with bitumen emulsions with other designations or from other manufacturers.

Consumption
approx. 1.4 - 2.2 kg/m², depending on the substrate and the surface treatment to be undertaken
Upon using high-quality chippings:
Grain size 2/5 mm approx. 1.4 – 2.0 kg/m²
Grain size 5/8 mm approx. 1.6 – 2.2 kg/m²

Product data in brief
Product type
cationic bitumen emulsion
Base
bitumen, water
Density at +20 °C
1.10 g/cm³
Consistency
liquid, homogeneous
Film-forming components
58 - 62 %
Colour(s)
black
Application
with spraying equipment of company “Maus”, ramp spraying equipment or the like
Processing temperature (ambient and substrate)
+40 °C – max. +60 °C
Cleaning
BORNIT® MultiClean Spray, BORNIT® MultiClean, BORNIT® Bitumen Cleaner
Storage
at least +5 °C - sensitive to frost
Shelf life
in originally sealed containers storable for 4 weeks
GISCODE
BBP10
VOC category
Actual permissible VOC content
0 g/ltr.
Hazard class according to ADR
keine

Type of charge
cationic
Binder
road construction bitumen
Screenings
max. 0,5 %

Health and fire protection, occupational safety
For information on handling, safety and ecology, please refer to the current safety datasheet.

Storage
The product can be stored for 4 weeks. Prior to using or filling the bitumen emulsion, briefly recirculate it. Suitable pumps are, e.g., non-clogging impeller pumps. When spraying directly from barrels, these must be rolled beforehand. BORNIT® Bituminous emulsion C60B4-REP is not frost-resistant!

Disposal note
Only recycle completely empty containers. Material residues can be disposed of according to AVV-ASN: 080410 (waste adhesives and sealants, except for those falling under 080409).

Note
The above information replaces all previous technical information about the product. Thus, this information is no longer valid. The details have been compiled according to the latest state of application technology. Please observe, however, that, depending on the state of the construction object, deviations from the method of application suggested in the datasheet may be required. Unless agreed otherwise in individual contracts, any information contained in the datasheet shall be non-binding and thus does not represent an agreed product constitution. We reserve the right to any changes in the information contained in this datasheet anytime.

0988

BORNIT-Werk Aschenborn GmbH
Reichenbacher Straße 117
08056 Zwickau / Germany

2015

6900002677/2018

EN 13808: 2013
Cationic Bituminous Emulsion C60B4-REP
fort he spraying and spreading method

Viscosity15-70 s (3)
Adhesive behaviour> 75 % (2)
Breaking-down behaviour110-195 (4)
Hazardous substancesNPD
DETERMINATION AT THE RECOVERED BINDER:
Consistency at average temperature of use Needle penetration at +25 °C≤ 220x0,1mm (5)
Consistency at increased temperature of use Softening point, ring and ball method> 35 °C (8)
DETERMINATION OF DURABILITY Phase 1 – AT THE STABILISED AND BINDER:
Consistency at average temperature of use Needle penetration at +25 °CDS (0,1mm) (1)
Consistency at increased temperature of use Softening point, ring and ball methodDS (°C) (1)
DETERMINATION OF DURABILITY Phase 2 – AT THE STABILISED AND BINDER:
Consistency at average temperature of use Needle penetration at +25 °CDS (0,1mm) (1)
Consistency at increased temperature of use Softening point, ring and ball methodDS (°C) (1)