BORNIT® Asphalt Adhesive Sprayer
asphalt adhesive | sprayer | pressurised container | spray on

Short information
- for precise and energy-saving distribution of BORNIT® Asphalt Adhesive C40BF5-S on all kinds of small construction sites
- pressure vessel with a capacity of 18 litres
- spraying capacity of up to 90 m² with one filling
Consumption
approx. 0.20 - 0.45 kg/m² BORNIT® Asphalt Adhesive C40BF5-S; up to 90 m² with one filling
Storage note
- store dry
- protect from frost
Complementary products
status technical data sheet
4th October 2021
Areas of application
The BORNIT® Asphalt Adhesive Sprayer is the indispensable tool for precise and energy-saving distribution of bitumen emulsion C40BF5-S (Asphalt Adhesive) or R2 C40BF5-S on all types of small construction sites.
The well thought-out design scores with great ease of use and high utility value. The pressure tank has a usable capacity of 18 litres and can be completely emptied with a single charge of compressed air. This results in a spraying capacity of up to 90 m² with one filling.
The well thought-out design scores with great ease of use and high utility value. The pressure tank has a usable capacity of 18 litres and can be completely emptied with a single charge of compressed air. This results in a spraying capacity of up to 90 m² with one filling.
Type and properties
Used for application of BORNIT® Asphalt Adhesive C40BF5-S or R2 C40BF5-S. The practical 25 kg adhesive canister from BORNIT® and the range of accessories for use with truck compressed air or via car valve set no limits to the application range of the Asphalt Adhesive sprayer.
Consumption
approx. 0.20 - 0.45 kg/m² BORNIT® Asphalt Adhesive C40BF5-S; up to 90 m² with one filling
Product data in brief
Product type
pressure sprayer
Base
pressure tank, spiral hose and spraying lance
colour(s)
light-grey
storage
store dry
protect from frost
Hazard class according to ADR
keine
Atomising lance
600 mm
Length spiral hose
5 m with 360° rotatable coupling
Pressure gauge
6 - 8 bar operating pressure
Compressed air connection
KSG 1/4” NW7
Capacity
18 litres
Vessel size
24 litres
Operating temperature
max. +40 °C
Operating pressure
6 - 8 bar
Empty weight
approx. 11 kg
Dimension (LxWxH)
330 x 780 x 280 mm
Health and fire protection, occupational safety
To ensure safe handling of the product, the physical, safety, toxicological and ecological information provided online, the information in the current operating instructions and the additional information on the label must be read and followed before purchasing or using the product! The applicable regulations, ordinances and laws must be complied with.
In case of doubt, please contact the BORNIT® application technology department or the BORNIT® service hotline on +49 375 2795 123.
In case of doubt, please contact the BORNIT® application technology department or the BORNIT® service hotline on +49 375 2795 123.
Storage
Store Asphalt Adhesive Sprayer in a dry and frost-proof place.
Note
The above information replaces all previous technical information about the product. Thus, this information is no longer valid. The details have been compiled according to the latest state of application technology. Please observe, however, that, depending on the state of the construction object, deviations from the method of application suggested in the datasheet may be required. Unless agreed otherwise in individual contracts, any information contained in the datasheet shall be non-binding and thus does not represent an agreed product constitution. We reserve the right to any changes in the information contained in this datasheet anytime.