Inotec® inoBEAM M8
spraying application | airless | bitumen | gentle on material | peristaltic pump
Short information
- light, small and handy device
- for liquid and paste-like materials
- material-friendly peristaltic pumping technique
- fast cleaning and maintenance
- dry-run-proof
- combinable with large containers (barrel)
- gradually adjustable quantity control
- forward and reverse operation
Consumption
Storage note
- store in a dry place
- if the pump is filled it must be absolutely frost-free!
Complementary products
status technical data sheet
2nd July 2021
Areas of application
Universal and easy-to-handle 230 V feed pump for liquid and paste-like materials
Type and properties
Material conveyance based on the milling principle – a flexible rubber disk is pressing the material to be conveyed through the pump housing into the materials hose; this produces less friction heat and the material is conveyed in a very gentle
Advantages
- light, small and handy device
- for liquid and paste-like materials
- material-friendly peristaltic pumping technique
- easy operation
- fast cleaning and maintenance
- gradually adjustable quantity control
- dry-run-proof
- removable materials container
- connector socket for remote control cable
- forward and reverse operation
- combinable with large containers (barrel)
Product data in brief
Product type
feed pump
Base
peristaltic pump system
colour(s)
grey, green
Processing temperature (ambient and substrate)
> +5 °C
Cleaning
BORNIT® MultiClean Spray, BORNIT® MultiClean or BORNIT® Bitumen Cleaner
storage
store in a dry place
if the pump is filled it must be absolutely frost-free!
Mains voltage
230 V, 50 Hz
Output
16 A
Conveying capacity
max. 8 l/min.*
Conveying distance
max. 30 m*
Conveying height
max. 20 m*
Grain size
max. 3 mm
Weight
approx. 28 kg
Health and fire protection, occupational safety
To ensure safe handling of the product, the physical, safety, toxicological and ecological information provided online, the information in the current operating instructions and the additional information on the label must be read and followed before purchasing or using the product! The applicable regulations, ordinances and laws must be complied with.
In case of doubt, please contact the BORNIT® application technology department or the BORNIT® service hotline on +49 375 2795 123.
In case of doubt, please contact the BORNIT® application technology department or the BORNIT® service hotline on +49 375 2795 123.
Storage
The machine must be stored away from moisture.
Note
The information set out above supersedes all previous technical information relating to the product. The previous information is therefore no longer valid. The details have been compiled in accordance with the latest state of the art in application technology. Please note, however, that depending on the condition of the building, it may be necessary to deviate from the working method recommended in this data sheet. Unless otherwise agreed in an individual contract, all information contained in this data sheet is non-binding and therefore does not constitute an agreed product specification. We reserve the right to make changes to the information contained in this data sheet at any time.
The product illustrations are to be understood as examples. No legally binding claim can be derived from them. We reserve the right to make changes to the product’s appearance.
Our packaging complies with the relevant legal requirements and with Regulation (EU) 2025/40 on packaging and packaging waste (PPWR). The technical documentation in accordance with Annex VII is available and can be provided on request by email to info@bornit.de.
The product illustrations are to be understood as examples. No legally binding claim can be derived from them. We reserve the right to make changes to the product’s appearance.
Our packaging complies with the relevant legal requirements and with Regulation (EU) 2025/40 on packaging and packaging waste (PPWR). The technical documentation in accordance with Annex VII is available and can be provided on request by email to info@bornit.de.
