BORNIT® Glass Fabric 58
glass mesh fabric | roof coating | roof | reinforcement insert
Short information
- alkali- and rot-resistant
- fine-meshed reinforcement insert
- good draping properties on uneven substrates
- good wettability
Consumption
with 10 cm overlap 1.10 m²/m²
Storage note
- store cool and dry
- storable for 12 months
Complementary products
Follow-up products
Form corners first, then the surface
status technical data sheet
9th November 2020
Areas of application
BORNIT® Glass Fabric 58 is used as a reinforcement core for roof coatings with BORNIT® Dachbit or BORNIT® Flexbit.
Type and properties
BORNIT® Glass Fabric 58 is an alkali- and rot-resistant glass fabric.
Processing
BORNIT® Glass Fabric 58 is embedded into the still moist embedding material without creasing straight from the roll or cut to size. The mesh must not be pressed in down to the substrate. At the mesh joints, an overlap of at least 10 cm must be provided. Subsequently, the embedding material must be uniformly applied once again, so that the mesh is no longer visible.
Consumption
with 10 cm overlap 1.10 m²/m²
Product data in brief
Product type
glass fibre mesh
Density at +20 °C
approx. 2.50 g/cm³
approx. 58 g/m²
colour(s)
white
Dimensions
WxL > 1.0 x 50.0 m
storage
store cool and dry
Shelf life
storable for 12 months
Hazard class according to ADR
keine
Roll width
100 cm
Roll length
50 m
Weight
58 g/m² ± 10%
Mesh width
approx. 1.0 mm x 2.0 mm
Warp
≥750 N/5 cm
Weft
≥650 N/5 cm
Health and fire protection, occupational safety
To ensure safe handling of the product, the physical, safety, toxicological and ecological information provided online, the information in the current safety data sheet and the additional information on the label must be read and followed before purchasing or using the product! The applicable regulations, ordinances and laws must be complied with.
In case of doubt, please contact the BORNIT® application technology department or the BORNIT® service hotline on +49 375 2795 123.
In case of doubt, please contact the BORNIT® application technology department or the BORNIT® service hotline on +49 375 2795 123.
Storage
The product must be stored dry and protected from direct solar irradiation or heat, resp.!
Disposal note
Only recycle completely empty containers. Material residues can be disposed of according to AVV-ASN: 200139 (plastics).
Note
The information set out above supersedes all previous technical information relating to the product. The previous information is therefore no longer valid. The details have been compiled in accordance with the latest state of the art in application technology. Please note, however, that depending on the condition of the building, it may be necessary to deviate from the working method recommended in this data sheet. Unless otherwise agreed in an individual contract, all information contained in this data sheet is non-binding and therefore does not constitute an agreed product specification. We reserve the right to make changes to the information contained in this data sheet at any time.
The product illustrations are to be understood as examples. No legally binding claim can be derived from them. We reserve the right to make changes to the product’s appearance.
Our packaging complies with the relevant legal requirements and with Regulation (EU) 2025/40 on packaging and packaging waste (PPWR). The technical documentation in accordance with Annex VII is available and can be provided on request by email to info@bornit.de.
The product illustrations are to be understood as examples. No legally binding claim can be derived from them. We reserve the right to make changes to the product’s appearance.
Our packaging complies with the relevant legal requirements and with Regulation (EU) 2025/40 on packaging and packaging waste (PPWR). The technical documentation in accordance with Annex VII is available and can be provided on request by email to info@bornit.de.
® Glass Fabric 58, application image">UN-number
No dangerous good in sense of these transport regulations.
