BORNIT^® Valve for Asphalt Adhesive Sprayer

status technical data sheet

4th October 2021

Areas of application

Adapter for connecting the BORNIT^® Asphalt Adhesive Sprayer to a compressed air system, for filling with compressed air.

Type and properties

Adapter valves for connection to air pressure systems

Product type

valve adapter

Base

for BORNIT^® Asphalt Adhesive Sprayer

colour(s)

brass coloured, red, blue

Dimensions

2m (truck adapter)

Cleaning

BORNIT^® MultiClean Spray, BORNIT^® MultiClean or BORNIT^® Bitumen Cleaner

storage

store dry

Hazard class according to ADR

keine

Flash point

n.a.

Health and fire protection, occupational safety

To ensure safe handling of the product, the physical, safety, toxicological and ecological information provided online, the information in the current operating instructions and the additional information on the label must be read and followed before purchasing or using the product! The applicable regulations, ordinances and laws must be complied with.

In case of doubt, please contact the BORNIT^® application technology department or the BORNIT^® service hotline on +49 375 2795 123.

Storage

Store the compressed air adapter in a dry place.

Note

The information set out above supersedes all previous technical information relating to the product. The previous information is therefore no longer valid. The details have been compiled in accordance with the latest state of the art in application technology. Please note, however, that depending on the condition of the building, it may be necessary to deviate from the working method recommended in this data sheet. Unless otherwise agreed in an individual contract, all information contained in this data sheet is non-binding and therefore does not constitute an agreed product specification. We reserve the right to make changes to the information contained in this data sheet at any time.

The product illustrations are to be understood as examples. No legally binding claim can be derived from them. We reserve the right to make changes to the product’s appearance.

Our packaging complies with the relevant legal requirements and with Regulation (EU) 2025/40 on packaging and packaging waste (PPWR). The technical documentation in accordance with Annex VII is available and can be provided on request by email to info@bornit.de.