158

BORNIT® WL Bitumen Roof- and Isolation Coating (white label)

bitumen | coating | high penetration | initial coating | roofing membranes
BORNIT
Short information
  • good coverage after the first coat
  • easiest handling because it is ready to use
  • can be used universally, therefore a wide range of possible uses
  • good adhesive properties
  • economical and cost-cutting, as equipment, material and labour costs are reduced
Product
Colour
Content
Bitumen Roof- and Isolation Coating (white label)
black
10 ltr. / bucket
sufficient for:
Order-No.
EAN code
euro pallet
approx. 25 m²
6900003325
4 017228 00307 8
45 bucket
Bitumen Roof- and Isolation Coating (white label)
black
30 ltr. / bucket
sufficient for:
Order-No.
EAN code
euro pallet
approx. 75 m²
6900004691
4 017228 00308 5
14 bucket
Consumption
approx. 0.4 l/m² per coat (2 coats recommended)
Storage note
  • store dry, product is not sensitive to frost,
  • keep away from sources of ignition
  • in originally sealed containers storable for 12 months

Status technical data sheet
02 June 2021

Areas of application
BORNIT® Bitumen Roof- and Isolation Coating is suitable for the initial coating as well as for maintenance and renovation of roofing membranes, welded membranes (except polymer bitumen membranes) and other bituminous coverings. BORNIT® Bitumen Roof- and Isolation Coating is also used as a protective layer directly after the roof covering has been laid. BORNIT® Bitumen Roof- and Isolation Coating also protects building components with concrete, brick or plaster surfaces against ground moisture and adheres well to wood and metal. It is not suitable for application on expanded or extruded polystyrene.

Type and properties
BORNIT® Bitumen Roof- and Isolation Coating is a solvent-containing, spreadable and sprayable, unfilled bitumen-based coating. BORNIT® Bitumen Roof- and Isolation Coating is processed cold and has a high penetrating capability. The product is tested according to AIB.

Advantages
  • good opacity with one coating already
  • easiest handling, since manufactured ready for use
  • universally applicable, therefore numerous uses
  • good adhesive properties
  • economical and cost-cutting, due to low equipment and material costs and effort

Surface
The substrate must be dry, clean and grease-free. BORNIT® Bitumen Roof- and Isolation Coating adheres to all substrates common in construction. For heavily weathered and chalking, mineral substrates, prime with BORNIT® Bitumen Primer.

Processing
BORNIT® Bitumen Roof- and Isolation Coating is ready for use and must be stirred before application! During application, ensure that the ambient and substrate temperature does not exceed +30 °C! In the cold season, store the product at room temperature prior to processing. Two coats are recommended.

Consumption
approx. 0.4 l/m² per coat (2 coats recommended)

Product data in brief
Product type
unfilled bitumen coating
Base
bitumen, solvent
Solvent
white spirit
Density at +20 °C
0.91 - 0.93 g/cm³
Consistency
liquid
Film-forming components
approx. 60 %
Colour(s)
black
Application
small or large brush, spraying equipment (airless)
Processing temperature (ambient and substrate)
min. +5 °C up to +35 °C
Thorough hardening time
max. 8 hours at +20 °C
Cleaning
BORNIT® MultiClean Spray, BORNIT® MultiClean, BORNIT® Bitumen Cleaner
Storage
store dry, product is not sensitive to frost, keep away from sources of ignition
Shelf life
in originally sealed containers storable for 12 months
GISCODE
BBP30
VOC category
Actual permissible VOC content
< 350 g/ltr.
Hazard class according to ADR
entzündbare Flüssigkeiten (Flam. Liq. 3)
Acc. to Industrial Safety Regulation (BetrSichV)
flammable
Flash point
30 – 43 °C

Fillers
none

Health and fire protection, occupational safety
For information on handling, safety and ecology, please refer to the current safety datasheet.

Storage
In originally sealed containers storable for 12 months. The product is not sensitive to frost!

Disposal note
Only recycle completely empty containers. Material residues can be disposed of according to AVV-ASN: 080409* (adhesive and sealing compound residues containing organic solvents or other hazardous substances).

Note
The above information replaces all previous technical information about the product. Thus, this information is no longer valid. The details have been compiled according to the latest state of application technology. Please observe, however, that, depending on the state of the construction object, deviations from the method of application suggested in the datasheet may be required. Unless agreed otherwise in individual contracts, any information contained in the datasheet shall be non-binding and thus does not represent an agreed product constitution. We reserve the right to any changes in the information contained in this datasheet anytime.

UFI SH00-60WF-Q00C-TFRE

Safety Data Sheet Poison Information Centre , 24h: +49-361-730730

ERFURT - Poison Control Centre Erfurt, Joint Poison Information Centre of the federal States of Mecklenburg-Western Pomerania, Saxony, Saxony-Anhalt and Thuringia; ggiz@ggiz-erfurt.de; www.ggiz-erfurt.de

-     What: name of the substance or product as precisely as possible, etc.
-     How much: as exact a quantity as possible
-     Who: Age, weight, sex and condition of the person(s) concerned.
-     When: Time of the event
-     Where: Place of occurrence
-     How: ingestion, inhalation, skin contact, etc.
-     Why: accidentally or intentionally

recommended, personal protective equipment: